Electrical
Characteristic Impedance:
| 50 ohms nominal |
+/- 3 Ohms (0-2.5 GHz) |
| |
+/- 5 Ohms (2.5-4.0 GHz) |
Attenuation:
0.25 dB maximum per mated pair (0-4.0 GHz)
V.S.W.R.:
1.25 maximum (0-2.0 GHz)
1.35 maximum (2.0-3.0 GHz)
1.45 maximum (3.0-4.0 GHz)
DC Resistance:
| Material Resistivity: |
|
15% IACS minimum. |
| Contact Resistance: |
|
Signal Conductor: 20 milliohms maximum through environs. |
| |
|
Ground Conductor: 40 milliohms maximum through environs. |
Dielectric Withstanding Voltage:
750 peak VAC for 10 seconds without dielectric breakdown.
Shielding Effectiveness:
40 dB Of Connector itself.
Power:
Up to 1.0 Amp @ 30 degrees Celsius temperature rise.
Mechanical:
Cable Dimensional:
Standard Product For Use with RG-58/174/316 Cables (Must Specify Cable). Large Cable Product for RG-62/71.
Latch Retention Force:
18.0 # [80 N.] minimum
Cover Retention Force:
18.0 # [80 N.] minimum
Insertion Force(Without Latch):
10 oz [ 284. gms] maximum
Insertion Force(With Latch):
12.0 # [ 53.4 N.] maximum
Pin / Signal Contact Push-out:
5.00 # [ 22.2 N.] minimum
Insulator Push-out:
5.00 # [ 22.2 N.] minimum
Shell Push-out:
18.00 # [ 80 N.] minimum
Latch Release Force (Without CPA):
4.50 # [20.0 N.] maximum
Connector Position Assurance (CPA) Lock Engage/Disengage Force:
4.50 # [20.0 N.] maximum
Latch Release Force (With Optional CPA Engaged):
18.0 # [80.0 N.] minimum
Extraction Force (With Latch Released):
7.5 oz [213. gm] maximum.
Cable Strain Relief:
22.5 # [100 N.] minimum (Except on Cables with lower tensile strength)
Polarization (All codes, except Universal Female - Code U):
No Mating to all other codes except Universal (Code Z) male. Mismate Strength 5.00 # [ 22.2 N.] minimum
Mating Durability:
20 Cycles Minimum
Environmental Validation:
Mechanical Vibration:
Passenger Compartment random vibration profile for two (2) hours in each of three (3) mutually orthogonal axis.
| Vibration profile |
Elapsed Time
(Min) |
Frequency(Hz)
(Hz) |
Power Spectral Density "PSD"
(G2/Hz) |
| 0 |
10 |
0.040 |
| 30 |
20 |
0.100 |
| 60 |
40 |
0.100 |
| 90 |
800 |
0.002 |
| 120 |
1000 |
0.002 |
Total test time six (6) hours. Test at room ambient after vibration completion for acceptable contact resistance, VSWR, and attenuation.
Solderability:
Wave Solder with eutectic 63/37 solder @ 232 +/- 6 degrees C. With RMA Flux for 4 +/- 1 seconds.
Acceptance Criteria: 90%+ wetting with a smooth, uniform coating.
Thermal (Transportation & Storage):
-40 to 185 degrees F. [-40 to 85 degrees C.]
Thermal (Soldering/Processing):
419 degrees F. [215 degrees C.] process maximum temperature for 30 seconds
Thermal (Service Life):
-4 to 131 degrees F. [-20 to 55 degrees C.]
Thermal Shock:
-40 to +185 degrees F. [ -40 to 85 degrees C.) 10 second transition, one-hour dwell at each extreme, 10 cycles.
Test at room ambient within one hour of completion for acceptable contact resistance, VSWR, and attenuation.
Flammability:
UL 94 V-1 or better.
Solvent Resistance:
No failure from intermittent exposure to Alcohol, Hot Water, Surfactants, No-Clean Flux, RMA Flux, or 111 Trichloroethane.